shaga/CallOfElements
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
b43c693353f3c2b95dfa3acca5d921cdb8ff7d65
CallOfElements/changes.txt
T
MDGitHubRepo 233acdbaaa Add files via upload 
Updated totemdata.lua to ignore spellname "Totemic Recall" when building the totems.
2024-11-29 13:25:01 -05:00

537 lines
22 KiB
Plaintext
Raw Blame History

v2.6
ADDITIONS:
- Korean localization
LeeEui-ho recently sent me the Korean translation and thus completed the
currently supported languages (at least until WoW is available in Spain as well ;-) )
CHANGES:
- Performance upgrade
There were some major memory leaks and COE consumed too much overall processor
time. I changed the way the element frames are updated and now they should no
longer use up a noticeable amount of memory and call the update routines only
when really necessary.
FIXES:
- Disappearing element frames
Whenever the totems were reloaded in "Timers Only" mode, depending on the currently
active totems, a totem frame could have disappeared and would only show up again when
throwing a totem of the same element from your spellbook.
This has been fixed and the timers will now reset properly when your totems are reloaded.
Note that this means, that you will lose active timers upon zoning but in most cases
you wouldn't need them anymore anyway.
=============================================================================================
v2.5
IMPORTANT NOTE:
Please use http://coe.wyverex-cave.net/ for further bug reports and suggestions.
Thank you
ADDITIONS:
- Chinese (simplified) localization
Thanks to windger a chinese translation is available as well.
Note though, that I have no way to test if it is correct or if it even
works at all! Please drop a comment at http://coe.wyverex-cave.net/ if
there are any issues
- Totems sets for named targets
Whenever you target a hostile unit, COE will now check if there is a
custom set with this unit's name available. If it finds one, that set
is activated. That also takes precedence over the PVP sets.
NOTE: The check is case-sensitive, so make sure you spell the name right.
- Tremor totem advisor
Added Druid's Slumber (need translations, though)
- Change anchor totem with CTRL
When pressing the CTRL-key while clicking a totem button, this totem replaces
the anchor totem for this element if it isn't already the anchor totem and
you have the Customize or Active Set mode activated. Furthermore, in Active Set
mode, it will also make the clicked totem part of the current set.
CHANGES:
- Prevent trinket pickup
You can no longer pickup the trinket by shift-dragging the totem button.
This didn't work in 2.4 and wasn't meant to be available anyway, since
the trinket doesn't have spell slot like a totem.
- Removed set restart modifier key
Until 2.4 you could assign a modifier key to automatically restart a set
while clicking a totem and pressing that key. This feature didn't work well
in most cases and it's also quite uselesse since you can also create a
/coe restartset macro (and most players already do this).
- When expanding a flex bar by mousing over it, currently docked totems
(i.e. active or advised totems or those in cooldown) will now show first
independent of their actual ordering. This makes it possible to mouse over
a docked totem and click it right away. Before, if the docked totem had a
high ordering, it would suddenly change its position when opening the bar
and you had to move the mouse again.
FIXES:
- /coe restartset
Due to a change in the last release this command didn't work anymore
This has been fixed
=============================================================================================
v2.4
IMPORTANT NOTE:
Please use http://coe.wyverex-cave.net/ for further bug reports and suggestions.
Thank you
ADDITIONS:
- Added trinket support
The Enamored Water Spirit trinket is now supported as part of the water element bar.
It behaves just like any other totem with the exception that you have to equip the
trinket to actually make it usable. Note that the trinket button will always show
up in the water element bar as long as you possess at least one water totem
but you can choose to make it invisible like any other totem until you got the trinket.
- French localization
Thanks to mcoaua a french localization is finally available now and will be continued
in further releases
Also thanks to Foussa for previous efforts
CHANGES:
- Lag-dependent timer activation
In order to decide whether to really activate a totem timer after trying to
throw a totem, COE will now take the current network lag value into account.
Timers would not activate properly with lag values of 1000ms or more before.
This should now work as expected
- Still active totem timers will now reset when you die
FIXES:
- When in Customize mode, a set element would not be properly reset after expiration,
if it was a dynamic button (i.e. when inactive only showing up when mousing over the bar).
First when opening the bar again, COE would notice that this element in the current
set had already expired and should be thrown again.
This has been fixed
- When switching totem sets, sometimes only the currently active totems would be thrown
again when issuing the next throwset command. This has been fixed
- When switching totem sets using the Customization Dialog, the currently active set
was not reset. The current set will now reset upon switching
- When switching from Customize to Timers Only or Active Set mode while totems were
active, sometimes an active totem showed up twice in its bar afterwards. This will
no longer happen
- The healing module didn't do anything in the german version because the healing spell
localizations were wrong. This has been fixed
=============================================================================================
v2.3
ADDITIONS:
- The "/coe priorset" command lets you cycle backwards through your configured sets now
- Added the option to show the active timers ONLY in the separate timer frame
Note that this means you get no timers at all if you choose to disable the timer frame
CHANGES:
- When the "Autoswitch sets in PVP" option is enabled, COE will automatically switch
back to the last active non-pvp set upon targeting an enemy mob
This should make switching between PVP and PVE more convenient
- COE should no longer try to heal dead or offline targets
FIXES:
- Fixed the german timers. Yes, really :)
- Fixed another one of those niggling typos with the disease totem advisor
- On some systems there was a COE_TotemData:485 nil error
Since this error never appeared on my own system I cannot tell for sure but
it should be more unlikely now that this error appears again.
If it should, please drop a comment for me
=============================================================================================
v2.2
NOTES:
- This is merely a hotfix for 1.10 and is taken right out of development
Chances are that you encounter some problems related to the healing module.
Also, there are features missing I promised for the next release and the
french localization is also not included yet.
But I guess for everyone of you it is more important that COE works again
than getting the new features :)
ADDITIONS:
- Added a basic healing module
A very basic form of healing module has finally found its way into COE.
There are two healing modes that you can trigger by assigning a key binding
in your key bindings dialog.
BATTLE HEAL
When hitting the battle heal key, COE will target the party member with the
lowest health ratio and heal him with the most appropriate spell using as
less casting time as possible (which always results in using the Lesser
Healing Wave actually)
It will only use the rank it really needs and thus helps conserving mana
BEST HEAL
Works just like battle heal but also uses the Healing Wave if it has a better
mana/effect efficiency. So, outside of combat, use best heal and when in combat
use battle heal if healing must be quick or you are in danger of losing casting time
NOTE
I am totally aware that the chain heal and effects like Nature's Swiftness
are not taken into account yet. This primarily results of the fact that I don't
possess any of those spells with my shaman yet. Furthermore I don't have an idea
yet when to use the chain heal in an automated way.
I am grateful for every kind of input regarding possible options and enhancements
to the healing module.
Just drop a comment at http://ui.worldofwar.net/ui.php?id=2126 or
http://www.curse-gaming.com/mod.php?addid=3407
FIXES:
- Fixed COE for 1.10
As far as I have tested, COE should now work properly with patch 1.10
Fortunately, Blizzard didn't prevent any of the functions COE uses from
being called in contrast to some unlucky mods out there...
- German timers
Hopefully, the german timers should now display the correct totem durations
Drop a comment for me if not
=============================================================================================
v2.11
FIXES:
- COE_TotemVisual:167 nil error
Errors in the COE_DisplayedTotems structure will now mostly be
fixed when entering the game. This should eliminate that niggling
error.
I have still no clue, why it happens in the first place, though.
I have ideas but nothing that really explains it.
Basically it seems that the error occurs only when training a totem
skill and don't already possess the corresponding totem.
If you get that error again, you can either relog or reset the
whole totem ordering with the "/coe resetordering" command
=============================================================================================
v2.1
NOTES:
- Thanks to Foussa of Hyjal, a french translation is in progress
and will hopefully be available soon
ADDITIONS:
- Rank 1 totems
You can now define a key modifier that throws the rank 1 totem
instead of the maximum rank when you click on a totem button.
Possible modifiers are Shift, Alt and Ctrl
- Added slash command "/coe reload"
This command does the same as the button in the configuration dialog,
i.e. it reloads all totems and sets
- Added slash command "/coe reset"
Resets all currently active timers and sets. While "/coe restartset"
only resets the active set so you can throw the same totems again,
"/coe reset" will also deactivate all active timers, i.e. you won't
be notified when still active totems expire
- Added slash command "/coe resetframes"
Returns all element bars to the screen center. This is quite handy
if you somehow accidentally moved one of your bars out of the screen
- Added bar grouping
Upon enabling the "Move bars as group" option, all element bars will
retain their relative positions when you drag one of them
I know you've all desperately waited for this one :)
- Spell pickup
When dragging a totem button with the Shift key held down, you will
pickup the spell instead and can drag it to one of your standard
action buttons
If you hold down the Ctrl key additionally, you will pick up the
corresponding rank 1 totem
CHANGES:
- When configuring the active set in "Active Set" bar mode, the active
totem of an element is now immediately made the first totem when you
click it. In v2.0 this was done only when you exited the configuration
mode and that caused a little confusion
- Advisor pet scanning
The totem advisor now also scans your party member's pets for debuffs
that can be cured by one of your totems
- When the next totem that would be thrown in your active set is still
in cooldown, COE will skip to the next totem of the active set instead
of giving a "Spell not ready yet" error message
- All messages from COE in the chat frame will now begin with [COE] and
will have their own color
FIXES:
- When setting the scale to the maximum of 1.2, opening the configuration
dialog decreased the scale by 0.01 up to a somehow arbitrary maximum
value where the scale rested then
This has been fixed
- When you didn't have all totem elements yet, the empty element bars
were nevertheless "visible" and prevented interaction with game elements
behind them. Empty bars will now be invisible
- Sometimes an expiring totem gave a nil-error message when also using the
separate timer frame. This should be fixed now
=============================================================================================
v2.0
CHANGES:
- I separated the visual and logical parts of the totem module and rewrote the
whole visual part. It now has much more customization options than before.
Each element now has its own totem bar and each totem bar is fully customizable
on its own. The former "Display Mode" now controls which totem is shown in the
"anchor button" of each totem bar, which is either your choice ("Customize"),
the (last) active totem ("Timers Only") or the member of the active set ("Active Set").
The bar extends from the anchor button in the direction you choose (Up, Down, Left, Right).
Furthermore, with the bar mode you can control whether only the anchor button ("Closed")
or all configured totems ("Open") should be shown. If you choose the "Flex" mode, only
the anchor button is shown until you mouse over it which will temporarily show all
other totems as well and hide them again after a short delay when the mouse leaves.
By setting the static button count to a value of greater than one, you can also have
a mix of the "Open" and the "Flex" mode, showing a number of totems by default and the
rest when mousing over.
Finally, you can also hide the whole element bar by setting "Hidden" as the bar mode.
Note, that you can still adjust which totems each element bar possesses and in which
order they appear. The anchor totem is always shown, though, thus removing it from the
bar while in "Configure Bar" mode has no effect as long as it is the anchor totem.
The configured totem order is retained whenever possible, that is, when a totem becomes the
anchor totem, e.g. by switching the active set in "Active Set" mode, it is now the first
totem in the bar but all other totems retain their relative ordering.
Also note that while in "Flex" or "Closed" mode, active and advised totems and totems
with an active cooldown will be temporarily shown just as if you were mousing over the bar.
- Made the configuration dialog draggable with the mouse
ADDITIONS:
- You can now activate a separate timer window that only shows totems that are currently active
and drag it where you want it on your screen. I added this feature because I noticed that
although having the timers in the bar and the notifications on the screen, it can happen in
instances that you lose track of your active totems. By dragging the timer frame somewhere
to your screen center you just need a quick look to see how long each of your totems will
be active.
In the configuration dialog you can choose the totem alignment (2x2 Box, Vertical, Horizontal).
- COE now has a scaling bar separate from the rest of your UI so that you can adjust the totem
bar sizes to your likings. The default value of 1.0 means COE scales just as the rest of your
UI does.
FIXES:
- Fixed a typo in the advisor output for the Disease Cleansing Totem
=============================================================================================
v1.82
NOTE:
- When assigning a new talent point you should reload the totems in the
configuration dialog if this talent changed mana cost or totem durations.
There is no way to know ingame when you assign a talent point so you
have to do this manually.
When you log in next time, reload your interface or learn a new skill,
the changes are automatically updated, though.
FIXES:
- Throwing the mana tide totem resulted in an error since the introduction of the
cooldown timers. This should be fixed now
- Fixed a typo in the disease totem advisor
The advisor should now correctly suggest throwing the Disease Cleansing Totem
- Fixed some more issues with the German localization
All totems should now properly keep track of their health and notify you when
they are destroyed by enemies
=============================================================================================
v1.81
FIXES:
- Hotfix for non-shaman classes
I accidentally made the totem bar visible for other classes in the last release
=============================================================================================
v1.8
ADDITIONS:
- Totems with a cooldown now display it in red digits when their timer is
no longer active but they are still cooling down.
This should give you more exact information on when you can cast the
totem again than the default cooldown texture. For better readability
I also removed the cooldown texture for those totems
- You now can restart casting of the active set at any time while in the previous
version you could only throw the set again when one or all of its totems
had already timed out.
Either assign a key binding or create a macro with the command "/coe restartset"
or assign a "Restart set modifier" in the configuration dialog. If you press
this modifier key while attempting to throw the active set, it will first restart
the set.
Note, that this only really works if you click a throwset macro or have the key
binding on your mouse because WOW thinks that the modifier you pressed belongs
to the key binding you want to execute. So if you bound throwing the active set to
your T key for example, you won't be able to restart the set by assigning the ALT
modifier and pressing ALT+T because WOW thinks you want to execute the ALT+T key binding.
Don't know if there is any way to bypass this yet.
CHANGES:
- Removed the totem bar backdrop and the config button
I guess most users didn't use the button anyway and the always
popping in backdrop got on people's nerves :)
You can now drag the totem bar by dragging any of the totem buttons
- Put the totem bar on a lower frame layer to minimize impact on mods
which rely on getting themselves on top of the rest like bag mods, for example
- The totem advisor no longer checks the raid group for debuffs now.
Since totems only have an effect on members of your party and not the
whole raid as I initially supposed, it is just wasted time and misleading
to check the raid as well
FIXES:
- Fixed a bug with the key binding display on the totem buttons.
All totem buttons should now display their appropriate key binding
- While in "Active Set" mode and configuring the active set, the red
borders around the set totems didn't show. This has been fixed
- There seemed to be a typo bug in the SavedVariables repair function of v1.7
Your saved variables will be once again repaired when your first load v1.8
- The mana costs of different ranks of the same totem were not read properly and
thus the totem bar sometimes showed a "usable" totem while the player still
didn't have enough mana. This has been fixed
- Fixed some issues with the German localization
=============================================================================================
v1.7
- Added an option to fix the totem bar position to prevent dragging it accidentally
- The shell command "/coe list" now shows all available shell commands
- In the German version the default totem set and the class sets could not be thrown
due to a localization bug. Also the cast order was not localized.
This has been fixed. Your saved variables should be fixed automatically when first
loading v1.7
Thanks to Shinzhu for pointing me in the right direction
- In "Customize" display mode, the totem order is now customizable for each
element separately. Just click on the "Configure Order" button and swap two
totems of the same element by clicking them one after the other. You cannot
swap totems of different elements, though, and this won't be implemented in
a further release because that would break the whole structure of the mod,
so don't bother asking :)
Note, that upon first loading v1.7 all totems appear in reverse order due to
an internal change in the ordering data structures
- In "Customize"/"Horizontal" and "Customize"/"Vertical" display modes, a small
gap is inserted between totems of different elements to group them visually
=============================================================================================
v1.6
- Added some more spells for the tremor totem advisor
Still need the german translations though
- The totem frame should now have the proper width when not all totems are
shown in "Customize"/"Box" mode
- Added the "Disabled" option in the "Tooltip Alignment" drop down menu.
This disables the tooltips for the totem buttons
- The currently active set did no longer show the red borders in the totem bar
This has been fixed
- When disabling autoswitching sets in PVP, configuration did not work properly
This has been fixed
=============================================================================================
v1.5
- "All Totems" mode has been renamed to "Customize" mode.
You can now customize which totems should be displayed in "Customize" mode
To start configuration click the "Configure Bar" button in the config dialog.
Configuration works exactly like the totem set configuration. Each totem that
should be visible has a green border while configuring.
- Totem button alignment now also works in "Customize" mode. You can align the
buttons either in a box, where totems of one element occupy a single row, or
you can display all totems horizontally or vertically
- By adding the seventh air totem in the last patch I accidentally removed the
sixth water totem :)
The "COE_Totem.lua:199" error should be fixed now
=============================================================================================
v1.4
- Added a seventh air totem button. Must have missed this one before.
COE should now load properly when having all seven air totems
Reference in New Issue View Git Blame Copy Permalink