A unit without health plays only death animations: CGUnit_C::
PlayAnimation (0x005FE2F0) returns unless IsDeathAnimation (0x005FDA90,
__stdcall) holds for the animation. An actor had no such gate, so a
missile already in flight when the target died still played its wound
(and its impact kit's animation) on arrival and replaced the death
animation; StopSpellVisual only drops the casts still preparing.
An actor whose own animation is a death animation now takes no kit
animation over it, and setting a death drops the kit animation that
plays. The missiles still land and show their impact effects.
An actor that casts a ranged spell now poses with its ranged weapon as a
unit does.
At the spell's start (HandleSpellStart 0x006E78A1, for Attributes 0x2 or
the auto-repeat flag), SetAmmoDisplay (0x0060BA30) is mirrored: the ammo
in hand is made with CreateLooseItemModel (kind 0x19 for a thrown
ranged item) and nocked at attachment 35 when the bow is already drawn.
$BWP (OnCombatModelEvent 0x006247D0) with a ranged spell under way runs
PlayBowPull (0x00624CC0): the weapon model, the item AttachItemModel
hung in its lane's hand (attachment 1 or 2), plays 160 BowPull at its
sequence length over the time left in the body's animation, from the
key bone state (hi - ftol(position / speed) - lo; nothing with the latch
set). The ammo then goes on the string unless a gun or crossbow shoots,
and the bow is drawn. $BWR with a missile waiting plays 0 on the weapon
for a bow animation and 161 BowRelease for a rifle one, then takes the
ammo off. EndRangedPose (0x0060F530) runs where the engine runs it, at
the missile release and when an interrupt drops a precast: the bow is no
longer drawn, the ammo leaves the hand and the weapon stands unless it
plays 161.
The models carry $BWP only in 105 LoadBow, so the precast's load must
not repeat. The sequence-end handler's ranged cases (0x005FC3F0) are
mirrored for kit animations: 105 goes on to 109 HoldBow and 106 to 110,
always, and a hold replays while the weapon is held and the spell still
prepares, so a long precast draws once and holds.
SetWorldModel: the WMO's own fog holds while the camera is above an
indoor part, fades in and out over 4 seconds, blends nearby fog zones,
comes in from the far clip in a scene without fog, and does not change
for a camera in liquid. The WMO's water, lava and slime show and
animate; outdoor water takes the colors of the player's zone.
A scene's WMO now draws the liquids of its groups and fogs as the world
fogs a WMO around its camera.
Liquid: the world's group liquid pass (DrawGroupLiquidPass 0x00684CD0)
sets matrix 8 to the placement moved by the camera, commits a lighting
record with fog and calls DrawMapObjectGroupLiquid (0x006B4060). The
scene does the same for each parsed group with flag 0x1000, after its
opaque list and before its translucent one, as the world draws the pass
between its model lists. The engine's drawer gives the animated frames
(0x0068AAC0), the magma scroll and, with BuildGroupDepthRamp (0x006B6B60)
first, the water's depth ramp. A group whose first liquid type is past 8
is not drawn: type 0xF asks GetLiquidFrame for a frame past its table.
The parity flag is 1, the value every group gets from outside the portal
walk (RunGroupCallback 0x006B4160), so all tiles draw.
Camera fog: each scene update traces 1760 down from the scene's camera
as ClaimCameraMapObject (0x006821F0) traces from the world's: the nearest
floor of the groups, then CrossPortals (0x006A3F80) with the fraction
1.05, and no claim for a group whose MOGI flags have 0x8.
GetCameraInteriorFog (0x0069DE20) is mirrored for the claim (it reads the
world camera's globals): record 0 blended with the first group's
candidate fogs, farthest first, by the engine's LightFalloff (0x0069E1C0)
and LerpFogRecord (0x0069EFD0). BuildSceneFog (0x006CEE30) gives the
rest: the target's end is capped at the far clip, the weight moves 0.25
a second (0x008115B0) toward 1 while the camera is over an interior
group and toward 0 otherwise, and the drawn fog is the scene's fog
moved toward the target by it. The WMO, its interior doodads and the
interior actors take the drawn fog (ApplyMapObjectFog 0x006C31E0). This
replaces the fixed record 0 fog. The first update takes the weight as
it stands; the camera's own liquid is not asked.
API.md documents what the last three commits added to ModelScene actors:
- actor:StopSpellVisual(), which interrupts the spells an actor still
prepares (a cast already made, and its missile, go on).
- actor:PlaySpellVisual for ranged spells: the ranged weapon gives what
the spell's visual lacks (all of Auto Shot's), the actor's ammo is the
missile (a plain arrow or bullet without one, a thrown weapon throws
itself), bullets do not show in flight.
- actor:TryOn of arrows and bullets as the actor's ammo.
- actor:SetShadowShown on a WMO floor: it follows slopes and steps and
fades with height; no floor, no shadow.
- scene:SetGroundTerrain and actor:SetPlayAnimationSounds: without a set
ground, the WMO floor under an actor picks its footstep and death thud
sounds.
- scene:SetWorldModel: only the lights of the part an actor stands on
light it, and the floor picks its sounds and takes its shadow.
README lists :StopSpellVisual with the other actor methods.
1.12.1 builds a ranged shot from the shooter, not from the spell. Auto
Shot (75) has no SpellVisual; UnitGetSpellVisual (0x0060D450) fills a
ranged spell's (Attributes 0x2) empty visual fields (the precast, cast and
impact kits, the missile flag and model, path, attachment, flight sound
and precast sound) from the SpellVisual of the ranged item's
ItemDisplayInfo (+0x28). A bow's (visual 5) gives LoadBow, AttackBow and
the arrow whoosh 4222. PlaySpellVisual now builds that 64-byte visual per
cast from the actor's ranged lane (INVTYPE_RANGED, THROWN or RANGEDRIGHT),
so it no longer needs the spell to have a visual of its own.
The arrow is the ammo. SMSG_SPELL_START / GO carry an ammo display for a
ranged spell; the launcher (CGUnit_C::LaunchSpellMissile 0x0060A3D0) makes
the missile from the visual's +0x1C when it is at least 1, else from the
ammo through CreateLooseItemModel (0x00479F40, the record's second model
and texture in the body model's scene), else the error cube, and draws a
missile launched during a rifle animation at alpha 0. The launch needs the
visual's missile flag or an ammo display (0x006E8A50). The ammo follows
the server's rule: a thrown weapon is its own ammo; a bow, crossbow or gun
shoots the actor's ammo, else what the server gives an NPC (5996 Rough
Arrow, 5998 Light Shot).
actor:TryOn(ammoItemID) (an extension) sets that ammo. The dress-up
worker refuses INVTYPE_AMMO, so the actor takes it before the worker's
dispatch; Outfit::ArmOf stays the worker's mirror. The held lane's byte 1
is now named subclass (UNIT_VIRTUAL_ITEM_INFO's layout).
$BWR releases a queued missile as the unit's model event does
(0x00600159): from the body's attachment 35 during a bow animation
(IsBowAnimation 0x005FCFB0), 36 during a rifle animation (IsRifleAnimation
0x005FCFD0), else from the event's point.
Not mirrored yet: BowPull and the nocked ammo on $BWP, the bowstring,
arrows stuck in the target, and drawing the ranged weapon at the shot.
Actors in a WMO scene now stand on the WMO the way 1.12.1 places a unit.
A unit's world entity is made with factory flags 0 (CGObject_C::CreateNode
0x00613E10 -> 0x00670DB0), so it lacks +0x90 bit 0x2000 (flag bit 3,
0x00670E9C) and ReattachEntity 0x006A86D0 sends it to AttachEntityToGround
0x006A8A20, not PlaceEntity 0x006A8C10 (game objects), which the actor
light mirrored before. Place now follows the unit's path: the probe starts
at the model's collision box centre through its matrix (UpdateNode
0x00613F80, GetCollisionBox 0x00713700) and finds the nearest group face
1000 yards down, else up past the sphere (TraceMapObjectsNearest 0x006A8840:
SegmentHitsGroupBox 0x006A47E0, IntersectSegment 0x006B92B0 mask 4). Only
that group links the actor and adds its MOLT lights. SetEntityLightFlags
picks the sun or interior, TraceGroupFace 0x006A2600 finds the face and
GetFaceTerrainType 0x006A26C0 its material's terrain type.
Footsteps and the death thud use that terrain type when the scene has no
SetGroundTerrain (the unit's +0xC60).
SetShadowShown on a WMO scene lays the blob as the world's decal.
DrawBlobShadow 0x006D7920 is mirrored up to DrawDecal: the box from 5/3 of
the height below the feet to 1 above it (0xCEA610 / 0xCEA60C, ThirdOf
0x006D6E50), the texture matrix, white with the model's alpha, depth
function 1 when shadowBias is 0. DrawDecal's world reads are replaced:
BuildDecalTransforms 0x006D6FA0 runs in its absolute mode, because the
other mode reads the world camera (null at the glue screen), and is moved
to the eye. DrawDecalBatches 0x006D7480 is mirrored with the WMO's own
facets (TestMapObjectBox 0x006AD330 -> CollectBoxFacets 0x006A3B10, mask
0x2F0122) and the engine's vertex, index and draw calls
(0x006D7810, 0x006D78A0, 0x0058A830). A scene without a WMO keeps the flat
quad.
The engine's queries take a map object def but read only its placement
(+0x94), inverse (+0xD4) and object (+0x118); the backdrop keeps a block
with those three.
actor:StopSpellVisual() (an extension) interrupts the casts still being
prepared, the drop a new cast already did (0x0060D1C0 stops the old
spell's kits). Without it a precast that ended after a death played its
cast animation over the death.
docs/API.md gains the WMO backdrop methods (SetWorldModel,
SetWorldModelByMapID, ClearWorldModel), SetPlayWorldModelSounds /
GetPlayWorldModelSounds, a Scene sounds section on hearing a scene from
its camera, and actor:PlaySound. SetWorldModel covers the props, their
fade, and the light the WMO gives the actors. SetPlayAnimationSounds and
PlaySpellVisual now say where their sounds play. README lists the new
methods.
An actor standing in the scene's WMO is lit the way the world lights a
unit standing in it, instead of by the scene light alone.
Placement (World::Settle, from the scene's update) mirrors PlaceEntity
(0x006A8C10). LinkEntityToMapObject (0x006A8ED0): the model's bounds
through its base matrix give the world box and its centre (SyncLightNode
0x006717D0); the box goes into WMO space (TransformBox 0x006DC540) and is
tested against the WMO (BoxOverlaps 0x006A4670) and each group
(BoxOverlapsGroup 0x006A4830, GetLoadedGroup, GroupBoxAnyHit 0x006A3EE0 or
GroupSegmentAnyHit 0x006A3F10). In each non-exterior group,
TraceGroupMasked (0x006A3A40, mask 0x20) probes 1000 yards down from the
centre (0x008022CC), else 1000 up; t is shared, so the nearest face of all
groups wins, and its point is taken along the down probe as the engine
takes it. SetEntityLightFlags (0x006A87F0): no face, or a group with flag
0x40, means the sun. Else BakeGroupLight's face path (0x006A8410):
SampleGroupColor (0x006A4DC0) reads the face's MOCV colour and
SplitLightColor splits it (directional floor 0xA8, ambient cap 0x60); a
day face blends both toward the sun by the colour's alpha. Every linked
group adds its MOLT lights through AddMapLight (GatherMapObjectLights
0x006A79C0), so torches light the actors near them. The actor is placed
again when its translation moved a squared 0.001 or more (0x00801360),
when its model changed, or when a new group of the WMO was made.
The light (World::ActorLight, the actor model's new lighting callback)
mirrors ApplyMapLighting (0x006A7300): an interior actor gets the WMO fog,
the ambient bytes and the directional bytes along the fixed indoor
direction (0x00CA816C, blended toward the sun's by a day face); a sun-lit
one the frame's light and fog; both then their map lights. The scene light
is the sun throughout. Without a WMO the callback is the frame's own, as
before.
The doodads' map lights move to a per-group list on the backdrop, shared
with the actors, and the interior light slots to one helper.
Not mirrored: AnimateMapEntityLight's ramp (0x0069E770), so the light
changes at once. A model with an M2 parent is not placed.
A WMO backdrop now shows its doodads the way the world builds them, and
every sound a scene plays is heard from the scene's camera at its distance.
Doodads (model/SceneWorld.cpp). Each parsed group makes its doodads as
CreateGroupDoodads (0x00695AA0) does: the group's MODR indices, kept when
FindDoodadSet (0x006A4FB0) gives set 0 or the instance's set; a doodad two
groups list is one def, sun-lit when any of them is exterior. Each def
mirrors CreateGroupDoodadDef (0x00694E90) and CreateDoodadModel
(0x00695100): the MODD record's translate / quaternion / scale matrix
times the placement, SplitLightColor (0x006A77E0) into the ambient and
directional bytes, the model from the MODN name, SetBaseTransform, the
engine's own done callback (0x006951B0) and PlayAnimation(-1, 0, -1, ...).
Lighting mirrors AddLights (0x006A8050): an exterior doodad takes the
frame's sun (the frame light callback 0x0076D680); an interior one its
ambient bytes and its directional bytes along the fixed direction at
0x00CA816C, then the group's MOLT point lights built as CreateGroupLights
(0x00695C00) and AddMapLight (0x006A7AC0) build them. An interior doodad
in a WMO with more than one MFOG takes MFOG[0], else the scene's fog.
Each frame mirrors DrawDoodadModels (0x00683F80): the world shows every
doodad it draws again (SetAnimated + SetVisible), faded by its sphere
(SetDoodadDefBounds 0x006952A0, CM2Model::GetBoundingSphere 0x00713680)
and the camera's ground distance, with the radius classes, fade ends and
ranges read live from 0x00810188..0x008101A8 and the large end capped by
the far clip.
Doodad sounds are opt-in, scene:SetPlayWorldModelSounds(enabled) /
GetPlayWorldModelSounds (a ClassicAPI extension, off by default): the
$DSO / $DSL / $DSE events of DoodadModelEvent (0x006951E0) through
PlaySoundAt (0x00458870) and the world's loop emitters (0x00461D80 add,
0x00462000 move, 0x00461F80 remove). The emitter pump runs only in the
world, so they play only there. A hidden scene (CSimpleFrame::Hide,
0x0076AD50) drops its loops.
Positional scene sounds (model/SceneSound.cpp). The engine has one
listener, placed by the world camera. A scene point is played where it
lies from the scene camera, its offsets along the camera's forward, up
and side laid along the listener's, read back through
FSOUND_3D_Listener_GetAttributes (0x007FDB50) in the engine's axes. The
engine then applies the row's cutoff, minimum distance and panning as for
a unit that far away. Sound::Play gains the world's 3D players:
PlayKitIDAt (0x0045CF00, RET 0x18, NULL past the cutoff), PlayKitLoopedAt
(0x004589A0) and Move (Sound::SetPosition 0x007A5B10), all owned so
StopSound stops them.
The actors use it: spell kit sounds at the actor, the missile's loop
following the missile (re-mapped each paint) and stopped when the scene
hides, and the animation sounds of SetPlayAnimationSounds at the actor.
actor:PlaySound(soundKitID) is a ClassicAPI extension: a SoundKitID once at
the actor, returning willPlay, soundHandle as PlaySound does.
A ClassicAPI extension: scene:SetWorldModel(path [, x, y, z [, yaw
[, doodadSet]]]), scene:SetWorldModelByMapID(mapID) and
scene:ClearWorldModel() show a WMO around the scene's actors. Both
setters return whether a WMO is shown; a set that fails clears it.
ModelSceneActor:SetModelByPath refuses .wmo paths, which only the scene
shows.
The map object is the world's own. CMapObj::Get (0x006A3230) loads it
into the engine's cache with one reference ours, released by CountDown
(0x006A33F0). Each paint keeps every group alive for 30 s (group
+0x15C) and queues LoadGroup (0x006A4A30) for a group that is neither
parsed (+0x164) nor being read (+0x160), so a group the world frame has
freed comes back. The pools, shaders and cache come from
CMap::Initialize at client start, so a WMO also shows at the glue
screen.
The engine's reader ends the program when a file does not open
(CMap::SafeOpen) and parses the root's chunks in a fixed order without
reading their tags. A root is refused unless MVER and the 16 chunks from
MOHD to MFOG are in that order inside the file, it has at most 384
groups, and each group file opens.
The paint draws the WMO after the animate pass, the way
DrawMapObjectPass (0x00684840) draws one instance:
- render states pushed; world stack 8 = placement x Translate(-eye);
- the frustum stack pushed (0x00682380), a volume of the scene's view
stored on it (BuildFrustumCorners 0x005C43B0 over the device view
moved by -eye and the device projection, planes by 0x00686640), then
moved into the object's space with the inverse placement
(0x00682ED0), which the drawers cull each batch against;
- a lighting record at the object's bounding sphere
(M2LightingInitialize 0x0071BC30, the scene's M2 lights for that point
by 0x0070A0F0, the scene light as the sun by 0x0071BF90, then the fog),
committed at the eye with fog by 0x0071C730;
- each parsed group: the portal vertex fade once (0x006C43D0), then the
interior (0x006B5190) or exterior (0x006B4F10) drawer, called directly,
because the world sets its drawer pointers only in its own frame.
Fog: the world fogs a WMO's insides with its MFOG records only for a WMO
with more than one record (0x0069DE20). With no candidate the fog is
record 0, its end capped at the far clip and its start that record's
fraction of the end. Other WMOs take the scene's own fog, staged with
the scene light by the frame's light callback (0x0076D680).
The drawers read two world globals. The group fog flag (0x00CA7F00)
would replace the fog with the light state's interior fog, so it is 0
while the scene draws. Window materials write the sun's colours through
the sun pointer (0x00C89EF0), which is NULL at the glue screen, so while
the scene draws it points at a copy of the scene light.
SetWorldModelByMapID reads the map's directory from Map.dbc, then the
WDT's MPHD, MAIN, MWMO and MODF. Only a map whose WDT holds one WMO and
no terrain has an answer. The placement is the world's own for a WDT
object: translate (-pos[2], -pos[0], pos[1]), then rotate z by
rot[1] + pi, y by rot[0] and x by rot[2] (degrees by 0x007FFAAC), with
the record's doodad set. Scene positions then are the map's positions,
so a creature's spawn point places its actor in the room.
Not drawn yet: the doodads, the room's light on the actors, liquids and
the camera's fog inside the WMO.
A ClassicAPI extension, off by default: actor:SetShadowShown(shown) /
IsShadowShown() put the world's blob shadow under the actor.
The shadow is 1.12's own (DrawBlobShadow 0x006D7920, reached from the
entity draw through 0x006D78F0): drawn only while shadowLOD
(0x0086F5B4) is 1 and the model is ready; the bounds of sequence (0, 0),
skipped when the x or y extent is under the range epsilon, clamped to
+-5 and multiplied by the length of the base transform's row 0
(GetBaseTransform 0x00710600); the four corners turned by the base
rotation and moved by the base translation. The texture is the one the
unit setup loads (Textures\ShadowBlob.blp, handle 0x00CE9DFC, device
object through 0x0044ACF0), with the decal's states: blend 4
(DST_COLOR / ZERO), lighting, fog and depth write off, combiner preset 5,
and the colour white with the model's alpha (GetAlpha 0x00710CA0;
0x004A2C10 packs that byte on top).
The world lays the shadow onto the ground's batches with a decal
(0x006D7330). A scene has no ground, so the paint draws the turned box
itself as a flat triangle strip on the plane of the base translation,
after the animate pass and before the draw passes, so every model draws
over the shadows. Culling is off, as for the engine's lightning quad
(0x007AFCB0). The decal's height fade and its shadowBias depth test
EQUAL are not drawn: both exist to match real ground. A model hung on
another casts none.
A ClassicAPI extension: scene:GetActorAtCursor() returns the shown actor
under the cursor, and the scene scripts OnActorEnter / OnActorLeave
(self, actor) run when that actor changes while the scene is the mouse
focus.
The pick is the world's own object pick (0x00480A50) on the scene's M2
scene, not a bounding-box test: EnableRayHits (0x007089B0), then
CM2Model::SetHitTestMode(model, 1, 0, actor) (0x00713CB0, ret 0xC) on
each shown actor's model and its children (held items, kit effects), as
0x00480D90 does for a unit; a child that is another actor's model (a
seated rider) is left to that actor. M2SceneRayHit (0x007089C0, ret 0x10,
retry 1 as the world passes) skins each instance animated in the latest
collect on the CPU and returns the value of the nearest triangle. The
ray empties the hit list on every call.
The ray is in view space, where the collect leaves the instance
matrices: the cursor (UI context +0x1118, NDC) in the paint's viewport
(the frame's rect clamped to the screen), unprojected through the
paint's own projection at view depth near and far. The paint's camera
leg is now CameraTransforms, shared with the pick, so view insets and
translation move the pick with the picture. CCamera::SetDeviceTransforms
(0x007AC640) reads only the rect's aspect, so the clamped viewport is
the space the cursor maps into.
The hover runs from the scene's update walk, only while one of the two
scripts is set (Frame::ExtraScripts cells) and the scene is the mouse
focus (UI context +0x7C).
A ClassicAPI extension with the contract of retail's PlayerModel
(CharacterModelBase) method of the same name. The kit is added next to
the kits that the actor already shows. The actor's SetSpellVisualKit
keeps retail's behaviour: it replaces the actor's one kit.
The kit goes through Model::VisualKit::Apply, the same routine
PlayerModel:ApplySpellVisualKit uses. This is the char-select ghost's
kit step (0x004727F0) for any kit: the effect models hang at their
attachments, and the tint and alpha procedures apply. The model owns
the effects, so a looping kit stays until the model changes, and a
oneShot kit stops when its sequence ends. HasAttachment waits for an
unloaded model file, so a call made before the model has loaded is
held in Actor::pendingKits and applied with SetSpellVisualKit's kit
once the model loads.
ClassicAPI extensions: actor:SetPlayAnimationSounds(enabled) and
scene:SetGroundTerrain([terrainTypeID]), each with its getter.
Each actor model now gets the engine's event callback
(CM2Model::SetEventCallback, 0x007133A0), as a unit's model does
(0x00607800). model/SceneEvents.cpp sorts the events by their
four-character tag, as the unit dispatcher CGUnit_C::OnModelEvent
(0x005FFBD0) does. It receives the $CSL, $CSR and $CST missile
releases, which moved there from SceneSpell.cpp. When the actor opts
in, it also plays the sounds that a unit plays. They come from the
CreatureSoundData of the display: its own row, else its model data's,
as GetSoundData (0x0060AFB0) picks it.
- $FD1 to $FD4: the fidgets at +0x38 (0x006232C0).
- $FDX: the stand vocal at +0x20, with the world's 41-in-101 chance
and a 10 s limit shared by all actors. It never plays for the
active player's copy (0x006236B0, 0x00623490).
- $WNG and $WGG: the wing flap at +0x2C and the glide at +0x30. The
dispatcher plays them as vocal kinds 7 and 10, through slot 34
(push 7 / push 0xA, call [eax+0x88]).
- $FSD: the engine's GetFootstepSound (0x00458450), by the scene's
ground terrain, with FootstepSounds on.
- $DTH: the dry thud from the engine's death-thud table (0x00C4E0F4),
by size class (GetUnitSoundSize 0x00625500) and the ground.
- $CSD: the event's own SoundEntries id, with EmoteSounds on.
- $TRD: the precast sound (SpellVisual +0x38) of a PlaySpellVisual
that is still preparing (0x0062FAA0).
The sounds are off by default, so stock scenes such as the dressing
room stay silent. They play in 2D through the by-ID player. A scene
without a ground terrain has no footsteps and no death thud. $CSS,
$CAH and $AH0 to $AH3 play nothing: they present a pending swing
(0x006247D0), and an actor never swings at anything. The unit's
display ID is kept on the actor so that its sound data can be found.
A ClassicAPI extension. actor:PlaySpellVisual(spellID [, target
[, castTimeMs]]) plays the visual of a spell cast between two actors. It
follows the steps of the world chain between two units. That chain
depends on units, missile objects and world objects, and an actor has
none of them, so model/SceneSpell.cpp repeats each step on actor models:
- The visual comes from GetSpellVisualRecord (0x006EC1E0), which also
makes the violenceLevel swap. The cast time comes from
FUN_GET_CAST_TIME, unless the caller gives one. The speed is
Spell +0x94.
- Precast (0x006EC220): the visual's +0x04 kit loops on the caster for
the cast time.
- Cast: the +0x08 kit plays once. A visual with a missile (+0x18 set,
speed above 0, a target other than the caster) makes the +0x1C model,
or Spells\ErrorCube.mdx, as the launcher 0x0060A3D0 does. Without a
missile, the impact plays at once (0x006E8BF0).
- Release: at the caster model's $CSL, $CSR or $CST event. The actor
model gets the engine's event callback (CM2Model::SetEventCallback,
0x007133A0), as a unit's model does (0x00607800). Without the event,
the release follows ReleaseMissilesFromHand (0x0060C9B0): it uses the
first of those events that the model has, else the caster's position.
The release then happens when the cast kit has no animation, when the
cast animation ends, or 2000 ms after the queue.
- Flight (0x0061CEB0, 0x0061E2A0): the speed is fitted to the time the
missile was queued (t = d/speed - queued, capped at 100). The missile
plays 144 InFlight and turns to its direction of travel. It aims each
frame at the target's attachment: +0x24 through
s_spellVisualAttachments (0x00860A18), else 15, else 19, else 0.75 of
the target's height. The +0x28 sound loops through the 2D loop player
0x00458900 until arrival, then fades over 0.15 s.
- Arrival (0x0061DC50): the target plays its wound animation, then the
+0x0C impact kit. A +0x30 impact model stays at the point until it
has no live particles (the impact list, 0x0061E930).
A kit's animation plays in place of the actor's animation. It does not
fire OnAnimFinished, and SetAnimation cancels it. Kit sounds play
through the by-ID player. Sound::Play gets a small header (PlayKitID,
PlayKitLooped, Stop) so that other modules can start a sound and stop
it safely. M2.h gets the event, particle and attachment helpers, and
VisualKit exposes its loop callback.
Three ClassicAPI extensions on the actor:
- GetAttachmentPosition(attachmentID) calls the engine's
CM2Model::GetAttachmentPosition (0x00712D50). It takes the
attachment's offset through its bone matrix and then through the
scene matrix (+0xDC, the inverse of the view the bones were built
under). The result is in the space of the root's base matrix, which
is the space of SetPosition. The engine does not check the id, and a
missing id (lookup 0xFFFF) reads past the attachment table. So the
method checks HasAttachment (0x00712CB0) first. It also needs every
model in the parent chain to be loaded, because the call waits for
the file and animates the parents first (EnsureAnimated, 0x00714000).
- AttachToActor(parent, attachmentID) hangs the actor on any
attachment through CM2Model::Attach (0x00712F70). It works like
AttachToMount without the seat animation. An id that the parent does
not have hangs the child at the parent's origin, which is the
unresolved-index path of EnsureAnimated.
- DetachFromActor() takes the actor off its parent (CM2Model::Detach,
0x00713020).
EnsureAnimated recurses through the parent chain, so an attach cycle
never ends. M2::CanAttach now refuses a cycle for both AttachToActor and
AttachToMount. HasAttachment moves into M2.h, and VisualKit uses it.
SetSheathedCategory(slot, category) picks where a sheathed hand item
hangs: Default (its own place), Back, Side, or Hide. It also adds
Enum.TransmogOutfitSlotOptionSheatheCategory.
1.12.1 finds the sheath attachment from the item's ItemStats sheath
type through GetSheathAttachment (0x0047A070): 1 is the back pair
(26/27), 2 is a large weapon on the back (30/31), 3 is the hip (32/33),
4 is the shield (28), and 0 has no sheath point. AttachItemModel
(0x0047A0C0) and DetachHeldItemSlot (0x0047A310) both use the type they
are given. So a category comes down to a different type for the lane:
Back turns 3 into 1, Side turns 1 or 2 into 3, and Hide gives 0.
Shields and held off-hand items keep their own type.
The lane holds the type it hangs with, so every engine detach (Undress,
UndressSlot, a TryOn that replaces the hand) removes the model from the
place it hangs at. The actor keeps each lane's own type and category,
and re-hangs a lane after each write (SetModelByUnit, TryOn,
DressPlayerSlot). UseUnitSheatheCategory(true) uses every item's own
type, because 1.12.1 units have no category.
IsSlotAllowed answers from the gates of 1.12.1's DressUpModel::TryOnItem
worker (0x00504540): a hand takes any held item, and an armor slot needs
the pane's character component (+0x3F8) with its ready byte (+0x40C) set.
A shapeshifted unit has neither, so its armor slots are not allowed. The
neck, rings, trinkets and ranged slot have no arm in the worker. A pane
without a model allows nothing. No 1.12 model hides an item in a slot it
takes, so IsSlotVisible gives the same answer.
The slot rule moves into Outfit::SlotAllowed, which the ModelScene actor
now shares, and TryOnResult reads the armor gate through the same
ArmorReady helper.
DressUpModel:GetItemTransmogInfo(slot), GetItemTransmogInfoList() and
SetItemTransmogInfo(info [, slot, ignoreChildItems]), the same contract as
the ModelSceneActor's: appearanceID is the item ID, illusionID the enchant
whose glow a weapon shows, 19 slots in the list.
The pane keeps its own Outfit::Worn. SetModelInstance reads the unit's
visible items into it after the original clones the unit. Then the engine's
TryOnItem worker (0x00504540) fills it from its own arms: the armor slot of
the component slot it set, the hand that TryOnAttach hangs (with the enchant
only when a glow shows), and nothing for the lane that TryOnEvict detaches,
because the worker leaves that lane's bytes in place. A read trims every slot
the pane no longer shows, which also covers the engine's Undress
(ClearModel 0x00504490).
SetItemTransmogInfo is TryOn without ERR_NOT_EQUIPPABLE. The worker shows
it only in its default arm (DisplayError 0x13), after the record is cached,
so a quiet try-on skips the worker for that arm. An uncached item is
remembered per pane and skipped the same way when the worker's cache
callback runs it again.
The ItemTransmogInfo argument reader and the ItemUtil.CreateItemTransmogInfo
pushers move from SceneActor.cpp to Model::TryOn, so both frame types share
them. Outfit gains InvSlotOfComponent for the armor arm's slot.
GetItemTransmogInfo(slot), GetItemTransmogInfoList() and
SetItemTransmogInfo(info [, slot, ignoreChildItems]) on the actor. On
1.12.1 the appearance is the item ID and the illusion is the
SpellItemEnchantment whose glow a weapon shows.
The actor keeps what each inventory slot 1..19 wears (Outfit::Worn).
SetModelByUnit reads it from the player's visible items
(FUN_UNIT_GET_VISIBLE_ITEM 0x005F0D60, item ID at +0x08), only for slots
the model shows: an armor slot while the unit's character component
holds a record for it (+0x4A8 + slot*4, so a hidden helm or cloak is 0),
a hand while its lane holds an item. A weapon's enchant is the first of
the visible item's 7 enchants (+0x0C) with an ItemVisual, the walk
GetItemDescVisual (0x0062EC70) makes, and only when a glow shows.
Non-player units have no visible items (the table is uninitialized), so
NPCs and creature displays read 0.
Outfit::TryOn now returns the inventory slot it filled; TrimWorn zeroes
every slot the clone component or lanes no longer show after TryOn,
Undress, UndressSlot and DressPlayerSlot, so evictions follow the model.
SetItemTransmogInfo is TryOn on the info's IDs without ERR_NOT_EQUIPPABLE,
which the callers show themselves. An appearanceID of 0 changes nothing.
The list entries are built with ItemUtil.CreateItemTransmogInfo, now
ported with ItemTransmogInfoMixin, and Constants.Transmog is registered.
DressPlayerSlot puts one inventory slot of a SetModelByUnit actor back
to what its unit wears. An armor slot copies the unit's own character
component record for the body slot (the dword array at component+0x4A8
that UnequipCharacterSlot 0x00478960 reads and clears) onto the actor's
clone with UnequipCharacterSlot + EquipBodySlotById (0x00478AA0), so a
helm or cloak the unit hides stays off: the unit's component has no
record there. A hand slot re-reads the unit's held-item lane, display
row and enchant glow and hangs only that lane, the other hand untouched.
IsSlotAllowed answers with TryOn's arms: the hands on any model, armor
slots when the actor has a component or a dressed display and is not
shapeshifted. IsSlotVisible gives the same answer; no 1.12 model hides
a slot it allows.
Outfit's slot map is now public (ComponentSlotOf) and HangWeapons hangs
each lane through one HangLane step that DressSlot shares.
API.md gets an entry for the actor's TryOn: which models take armor and
which take held items, the dual-wield rule, the wait for the model and
for the item data (with the hand and enchant kept), and what removes the
items. SetSheathed now says it applies to any actor and to items that
TryOn adds later. The README's ModelSceneActor row lists :TryOn.
A scene actor can now put an item on its model, as DressUpModel:TryOn
does on the dressing-room pane. Creature displays carry no weapons (a
creature's are server-side equipment), so this is how an actor holds a
sword, shield or staff.
The pane's worker, TryOnItem (FUN_DRESSUPMODEL_TRY_ON_ITEM, 0x00504540),
has two arms, and Outfit::TryOn now holds both for the pane and the
actor:
- armor: UnequipCharacterSlot (0x00478960), then EquipBodySlotById
(FUN_CHARCOMP_SET_ITEM, 0x00478AA0) on the inventory type's component
slot;
- held items: pick the hand, keep the other lane only when CanHoldBoth
(FUN_DRESSUPMODEL_CAN_HOLD_BOTH, 0x00504BC0) allows the pair, with
dual wield from FUN_PLAYER_CAN_DUAL_WIELD (0x005EAB70) when the model
shows the active player, detach the target lane, fill it and attach
the item model (0x0047A0C0).
The pane takes armor only while its ready byte is set, which is
DISPLAYID == NATIVEDISPLAYID (0x00504450); the actor reads the same two
fields (OFF_UNIT_FIELD_NATIVEDISPLAYID = 0x1F8 added), so a shapeshifted
unit's copy takes held items only. A creature display takes held items
only, as it has no character component.
Model::TryOn holds the shared argument read (item ID, link, recipe link,
carried item name, hand slot name, enchant), the worn-item lookup and
ERR_NOT_EQUIPPABLE. DressUpModel:TryOn now uses it and Outfit::TryOn;
its own copies are gone.
The pane's worker waits for an uncached item record through the item
cache callback. The actor waits for the record and for its model to
load, and puts the waiting items on in Update, before OnModelLoaded
runs. It returns Enum.ItemTryOnReason: DataPending while the record
loads, NotEquippable for a type with no arm or armor on a model that
cannot take it, else Success.
OrbitCameraMixin tests the camera row's flags against
Enum.ModelSceneSetting.AlignLightToOrbitDelta on every update
(ShouldAlignLightToOrbitDelta), so a scene with an orbit camera threw
"attempt to index field 'ModelSceneSetting'" each frame. C_ModelInfo's
module now registers the enum with its one value, 1, under the
UIModelInfo system.
The ModelScene paint frames the camera over the view rect (the frame's
rect less its insets, moved by its translation), and Project3DPointTo2D
frames it over the whole rect. That looked like a gap, so retail was
probed: a 400x200 scene with its camera at (-10, 0, 0) projected the
origin to (142.22, 71.11) plainly, with SetViewInsets(100, 0, 0, 0) and
with SetViewTranslation(50, 0). The comment above Project now records
this, so the whole-rect framing stays.
Storm's SMemAlloc (FUN_STORM_SMEM_ALLOC, 0x006462E0) and SMemFree
(FUN_STORM_SMEM_FREE, 0x00646430), both __stdcall with four arguments,
were called by hand in thirteen files, through AddOns::EngineIO's
typedefs, local typedefs, Event::Custom's own pair and
Frame::Subclass::Allocate.
storm/Memory.h now holds Storm::Alloc, with a zero-fill option for the
flag bit 3 (Offsets::STORM_SMEM_FLAG_ZERO_FILL), and Storm::Free. Every
caller uses them, with the same file and line labels as before; the
EngineIO typedefs, Custom's pair and Subclass::Allocate are gone.
Every region and frame carries a layout sub-object at +0x24 (4.3.4's
CLayoutFrame; OFF_REGION_ANCHOR, OFF_FRAME_LAYOUT_SUBOBJECT for a frame),
and three engine calls on it were wrapped by hand in sixteen files, each
with its own typedef and often its own AnchorOf / LayoutOf / FrameOf
helper:
- CLayoutFrame::GetRect (FUN_REGION_GET_RECT, 0x00768320), the
{bottom, left, top, right} rect, false before layout;
- IsResizePending (FUN_REGION_LAYOUT_DIRTY, 0x00768310);
- CLayoutFrame::Resize (FUN_LAYOUT_RESIZE, 0x007680E0), 1 to lay out now,
0 to mark for the layout pass.
frame/Layout.h now holds them, taking the region or frame itself, with
Of and OwnerOf for the sub-object and back, and GetResolvedRect for the
read the edge getters make (Script GetLeft 0x007A1A19: a pending resize
run now, then the rect). Frame::Subclass::FrameOfLayout is replaced by
OwnerOf.
The draws that leave the UI pass's transforms saved and restored the
device projection, view and viewport by hand, each with its own
typedefs: the ModelScene paint (as SimpleModelDraw 0x0076D240 does), the
portrait bake, ClipChildren's ScrollFrame-shaped draw (0x00787220), and
the ModelScene projection, which reads the camera's matrices back.
AlphaGradient read the projection and viewport the same way, and the
scene and the bake each wrapped CameraSetDeviceTransforms
(FUN_CAMERA_SET_DEVICE_TRANSFORMS, 0x007ADA40).
gx/Device.h now wraps FUN_GX_GET/SET_PROJECTION, FUN_GX_GET/SET_VIEW and
FUN_GX_GET/SET_VIEWPORT, and Gx::SavedTransforms saves all three for a
scope and restores them at its end. Model::Camera::SetDeviceTransforms
wraps the camera call. Only AlphaGradient's hooks on the two setters
still name the addresses.
The projection now also puts back the viewport, unchanged. The bake
reads and disables fog just before it saves the transforms; the restore
order is the same as before.
The portrait bake and the ModelScene actor's SetModelByUnit both copied a
unit's model with CreateModelFromModel (FUN_M2SCENE_COPY_MODEL,
0x00707400, flags 0) and stripped the copy's helm, shoulders and held
items with DetachAllItemModels (FUN_DETACH_ALL_ITEM_MODELS, 0x0047A230),
each with its own typedefs.
M2::CopyWithoutItems does the two steps; both callers use it.
CM2Model's SetDiffuseColor (FUN_M2MODEL_SET_DIFFUSE_COLOR, 0x00710CF0)
was wrapped by hand in VisualKit and SceneActor, FindChild
(FUN_M2MODEL_FIND_CHILD, 0x00712F00) in Outfit and SceneActor, and
VisualKit called SetAlpha (FUN_M2MODEL_SET_ALPHA, 0x00710CB0) directly
next to the M2::SetAlpha wrapper.
M2.h gains SetDiffuse and FindChild, and the three files call M2::
for all three.
Scene.cpp and SceneActor.cpp each had NumberArgs and FloatArg, the same
loop that raises the engine's "Usage: <owner>:<usage>" error when an
argument is not a number, with the frame and actor arguments in a
different order.
One NumberArgs, which takes the owner's display name, and one FloatArg
are now declared in model/Scene.h and used by both files.
CSimpleFrame::NotifyLayerChanged (FUN_FRAME_NOTIFY_LAYER_CHANGED,
0x0076A990, __thiscall (frame, layer)) was wrapped by hand in Cooldown,
ModelScene and ClipChildren, and CScriptRegion::NotifyLayerChanged
(FUN_REGION_NOTIFY_LAYER_CHANGED, 0x0077FDF0, __thiscall (region)) in the
inline-texture pool and the texture wrap. Each file carried its own
typedef for the same engine call.
frame/LayerChange.h now holds the two: NotifyFrame and NotifyRegion. All
five files call them.
Cooldown and ModelScene each carried their own copy of the parts every
frame class this DLL adds needs: a type id, IsA, IsObjectType,
GetObjectType, GetScriptMethod, the deleting destructor and its layout
thunk, the vtable build, and a factory body that allocates the block with
SMemAlloc (FUN_STORM_SMEM_ALLOC, zero-filled), runs the engine class's
constructor and installs the vtables. The copies had already drifted:
Cooldown compared type names with _stricmp, ModelScene with Storm's
SStrCmpI.
Frame::Subclass::Class now holds a class's name, the engine class it
extends (vtable, layout vtable, constructor), its size and a function that
releases its own fields, plus its type id, method hash and vtable copies.
Templates on that object give the shared overrides, BuildVTables, New and
RegisterFactory (FUN_FRAMEXML_REGISTER_FACTORY). Both classes now answer
IsObjectType through Game::StrCmpI and take CSimpleFrame's script resolver
(+0x0C), which Cooldown's copied vtable already held.
DressUpItemLink went on to DressUpMountLink for an item the model cannot
wear, and DressUpLink called DressUpMountLink again when that returned
false. A link that was neither wearable nor a mount ran the mount lookup
twice, and an uncached item started its cache load and wrote the pending
mount twice.
The wearable-item step is now one local function. DressUpItemLink, which
1.12.1's FrameXML (ItemRef, bags, loot, the auction house) calls alone,
tries the item and then the mount. DressUpLink keeps retail's shape: the
item step for item links, then one DressUpMountLink call that gets its
forcedFrame.
When a mount's creature is not cached, DressUpMount records the mount and
waits for CREATURE_DATA_LOAD_RESULT. The handler cleared that record on
any creature's result. A failed or successful load of an unrelated
creature (another addon's query, a world creature) consumed it, and the
preview never opened when the mount's creature arrived.
The pending record now holds the creature GetMountInfoExtraByID loads:
the misc value of the mount spell's SPELL_AURA_MOUNTED effect, read with
C_Spell.GetSpellEffectInfo. Only that creature's result clears the
record, and only a successful one opens the preview.
Model::Outfit::UndressSlot cleared and detached a held lane even when the
pane or actor had no character component. It called DetachHeldItemSlot
and zeroed the lane on a creature model, or on a pane whose component at
OFF_DRESSUPMODEL_COMPONENT was not built yet. Before the Outfit split,
DressUpModel:UndressSlot returned early in that case.
The check is back in the shared helper, so DressUpModel and the
ModelScene actor both return before they touch a lane or a component
slot. Undress (ClearModel, 0x00504490) still clears both lanes without a
component, as vanilla's own does.
API.md gains a ModelScene section: CreateFrame("ModelScene") and its XML
attributes with the scene's starting camera, light and fog; the camera,
view inset and translation, Project3DPointTo2D, light, fog, draw layer,
pause and overlapped-model methods; every actor method (model sources,
unit dressing, placement, bounding boxes, animation and pause, spell
visual kits, mount seating), the actor scripts and <Actor> templates;
and the four C_ModelInfo getters. C_MountJournal.GetMountFromItem joins
the Mount section and GetCursorDelta the Input section.
README.md adds a Model scenes highlight, the ModelScene, ModelSceneActor,
ModelInfo and Mount rows, GetCursorDelta in the in-game and glue tables,
and Enum.ModelBlendOperation.
M2SceneAdvance (0x007074D8) updates only the models on the scene's animate
list, and that update (CM2Model::Update, 0x00719370) is what queues a
sequence's end callback; the paint's animate pass then empties the list.
Actors put their models on the list after the scene frame's clock had
advanced, so no actor model was ever updated: a looping animation still
played (its pose comes from the scene clock), but a one-shot one such as
AttackUnarmed stopped on its last frame and OnAnimFinished never ran. The
scene's update now links every ready actor model (Link) before the clock
runs, the order the Model frame's own clock (0x0076D7F0) uses.
A new animation also drops an end still pending for the one it replaces.
The engine reports a replaced play to the done callback as reason 1, which
the actor ignores; an end queued in the same advance reached the actor as
if the new animation had ended. Two actors whose animations ended in one
advance then saw OnAnimFinished for the animation the other's script had
just given them.
SetPaused(paused[, affectsGlobalPause]) holds one actor's animation while
the rest of the scene plays on. It uses the engine's own resume: the key
bone's place in its sequence is read once the model has loaded with
CM2Model::GetKeyBoneAnimState (0x00711FE0) and set back each update with
SetKeyBoneAnimTime (0x007127F0). The model stays on the scene's animate
list, so a paused actor still moves, turns and takes the light, and its
sequence never reaches its end. Unpaused, it plays on from that frame.
GetPaused returns the actor's own flag and the global one, set as the
retail probe read them back: the default sets both, and
affectsGlobalPause false sets only the actor's own.
SetModelByUnitCreatureDisplayID(unit) shows the display the unit shows
now (UNIT_FIELD_DISPLAYID) the way SetModelByCreatureDisplayID shows one.
Retail's pet tab calls it with "pet".
SetViewInsets(left, right, top, bottom) and SetViewTranslation(x, y), with
their getters and the XML <ViewInsets left right top bottom> child, frame
the camera's picture inside the ModelScene. Both are in the frame's own
units, with y up.
The paint gives the camera's CameraSetDeviceTransforms (0x007ADA40) the
frame's rect less the insets and moved by the translation, converted to
layout units with PixelToInternal(length * effective scale). The camera
takes its aspect from that rect, as it does from the frame's. The device
projection is then read back (0x0058B090), scaled and shifted in clip space
so that the view rect lands where it lies in the frame, and set again
(0x0058B040). The viewport stays the frame's rect, so drawing still stops
at the frame's edges, and negative insets let the view reach past them.
Project3DPointTo2D keeps projecting over the frame's rect and ignores both
settings, which is what retail does.
The ModelScene mixin calls two scene methods the frame did not have: OnLoad
calls SetAllowOverlappedModels(true) for StoreModelSceneMixinTemplate, and
Transform3DPointTo2D calls Project3DPointTo2D.
Project3DPointTo2D runs the point through the matrices the paint draws with.
It saves the device projection and view (0x0058B090 / 0x0058B0B0), runs
CameraSetDeviceTransforms (0x007ADA40) over the frame's rect, reads both back
and restores them. The view looks from the origin, so the point goes in
relative to the camera eye. The matrices are row-vector, and the perspective
matrix (0x005C3CC0) puts 1 at m11, so w' is the view depth. A |w'| under
0.001 projects nothing, the rule of the engine's own projector (0x005C4F30).
The result is in the frame's units times its effective scale, from the
bottom-left of the frame, as InternalToPixel gives the rect's extent. A point
behind the camera still projects. Depth is 1 at the near clip and 0 at the
far clip, by distance along the camera's forward axis.
SetAllowOverlappedModels stores its flag (default false). 1.12 draws a model
frame whatever overlaps it, so the flag has nothing to gate.
A ModelScene mount actor now seats a rider the way 1.12's world mount
(0x00607A00) does: CM2Model::Attach (0x00712F70) puts the rider's model on
the mount's attachment 0, and the rider plays the seat animation (91).
Attach takes the rider off the scene's animate list and the mount holds a
reference on it, so the actor update no longer re-links a seated rider, a
rider that drops its model detaches first, and a mount that drops its
model unseats the rider through the CM2Model destructor (HandleClose2
0x007103A0 destroys at zero). The seated rider keeps its placement, now
relative to the seat, as the world mount sets the attached rider's base
transform.
CalculateMountScale is the mount display's CreatureModelScale
(CreatureDisplayInfo col 4, OFF_CREATUREDISPLAYINFO_SCALE): the world
seats the rider at +0x98 over that scale, and +0x98 is always 1.0.
DetachFromMount only detaches, leaving the seat animation, unlike the
world's Dismount (0x00607CE0). M2::Attach / M2::Detach wrap the two calls
for the actor and the visual kits; Detach tests the parent first, since
the engine call drops a reference unconditionally.
C_MountJournal.GetMountFromItem returns the mount of an item whose use
spell applies SPELL_AURA_MOUNTED; an uncached item starts its load.
Enum.ModelBlendOperation is registered.
The dressing room gains retail's mount mode: DressUpLink,
DressUpMountLink and DressUpMount show a ModelScene over DressUpFrame's
backdrop, above the button row, in place of DressUpModel (whose scale 2
rect reaches over the buttons). DressUpItem returns to the player model.
A mount whose creature is not cached opens when CREATURE_DATA_LOAD_RESULT
arrives. Control-click previews a mount from a spell link (Turtle-shaped
links too), from a cached item that is not wearable, and from the
spellbook, where a mount spell then never casts.
Retail's ModelSceneControlFrame is ported with its strings in every
locale and GameTooltip_AddBodyLine. Its seven atlases are built in: the
sprites cut from retail's CommonIcons / CommonButtons into one 128x128
palettized BLP2 near their drawn size, since a built-in texture has one
mip. Held rotation counts retail's per-frame 0.05 per 1/60 s, the speed
of 1.12's own rotate buttons, instead of per frame at 1.12's uncapped
frame rates.
ModelSceneActor:SetModelByUnit copies the unit's model the way 1.12.1's
character panes do in AttachUnitModel (0x005059A0): the unit's own
character component is pumped forced (UpdateCharacterComponent 0x00477860),
its model (+0xD8) is copied into the scene's M2 scene with
CreateModelFromModel (0x00707400, which carries the helm, shoulders and
held items), the effect and spell attachments come off
(DetachAllItemModels 0x0047A230), and the hand grips close (CloseHand
0x00479660). What DressUpModel's SetModelInstance (0x00504350) adds comes
next: a clone of the unit's component (CloneCharacterComponent 0x00476CB0,
on a pool component with the model AddRef'd) and the two held-item lanes
from unit vtable +0x98. The actor pumps the clone on every update, as the
DressUpModel paint (0x00504470) pumps its own, so outfit changes show at
once; OnModelLoaded waits for its first composite.
On top: retail's Dress, Undress(includeWeapons), UndressSlot, SetSheathed /
GetSheathed, SetAutoDress / GetAutoDress, IsGeoReady and GetModelUnitGUID.
Undress mirrors ClearModel (0x00504490); sheathing is the unit's
AttachHandItem step (AttachItemModel 0x0047A0C0 with the sheathed flag).
The lane, weapon and undress steps move out of Model::DressUp into
Model::Outfit, which the DressUpModel pane and the actor share. One change
on the pane: UndressSlot on a held slot no longer needs the component.
PumpDresser takes the engine's force argument, which the old typedef
called an unused pointer.
Retail's camera registry, camera base, orbit camera, scene mixin and
actor mixin come over verbatim, with their XML templates, so a scene
built with SetFromModelSceneID frames, scales and orbits its actors the
way retail's does. What they need from the client:
Actor templates. 1.12's XML loader registers every virtual top-level
node whatever its tag, so <Actor name="ModelSceneActorTemplate"> is a
template that Xml::Template finds. CreateActor(name, template) loads it
the way an animation group loads its own: the whole inherits chain's
mixins first, then each node from the base up, then OnLoad. The
parentKey, parentArray, <Scripts> and <KeyValues> readers move out of
the animation loader so both use them.
Scene state. Light setters write the frame's M2Light through the
engine's own setters (M2LightSetType 0x0071B620, SetDirection
0x0071B6A0, SetPosition 0x0071B650, SetEnabled 0x0071B780). Fog uses
the Model frame's fields (+0x3A4..+0x3B0), stored as Model's own
SetFogColor, SetFogNear, SetFogFar and ClearFog store them, and starts
at retail's values. The draw layer goes through the engine's layer-name
functions (0x006F18B0, 0x006F1900) and marks both layers changed.
SetPaused keeps the frame update but skips Model's M2SceneAdvance. The
XML loader adds drawLayer, fogNear, fogFar and <FogColor> after the
frame's own loader.
Actor state. A blend operation for PlayAnimation. Spell visual kits use
the routine behind PlayerModel:ApplySpellVisualKit, which now takes a
model instead of a pane; the actor applies a kit once its model loads
and takes the effects off when the kit changes. 1.12 has no animation
kits, so PlayAnimationKit and StopAnimationKit change nothing.
GetCursorDelta, which the orbit camera drags with, samples the top's
cursor (+0x1118) once a frame at the head of the UI render callback and
converts it the way GetCursorPosition (0x0048B820) does, so the delta is
the difference of two GetCursorPosition values. C_PlayerInfo.
GetAlternateFormInfo answers false, false: 1.12 has no alternate forms.
Every script coordinate the engine pushes (GetLeft, GetStringWidth,
GetFont's height, GetCursorPosition, OnCursorChanged) is
DivideByScreenScaleX(GetScaledScreenAspect() * [0x007FFD68] * value):
0x0041AD70, then the 1024.0f read from .rdata, then 0x0041AE40, with
the quotient stored from ST0 as a double.
Game::InternalToPixel did the same arithmetic from the globals in double
precision, while the edit-box caret, the font height getters and texture
tiling each kept a private copy of the engine chain. InternalToPixel now
makes the engine's calls in the engine's order, rounding the float
product once as the engine's fstp dword does, and the three modules use
it. PixelToInternal reads the 1024 from the same .rdata float, so the
UI_COORD_SCALE_UNIT constant is gone.
ModelScene is a 3D stage of model actors with its own camera. 1.12.1's
Model frame is already one: every Model frame owns an M2 scene and a
clock, and its paint (SimpleModelDraw 0x0076D240) animates and draws the
whole scene, each unattached model with its own placement matrix. The
stock frame only ever places one model.
So a ModelScene is a CSimpleModel: the Model factory's allocation plus
our fields, CSimpleModel's constructor (0x0076C8E0), then copies of its
two vtables with the Model half hidden from Lua. Lookup goes to our
method hash and then CSimpleFrame's, the type answers ModelScene, Frame
and Region but not Model, and Model's script names and XML loader give
way to the Frame ones. The layer emit queues our paint on ARTWORK. The
paint repeats SimpleModelDraw call for call: save the device transforms,
project through the frame's camera over its rect, clamp the viewport,
clear depth, place each actor where slot 0x98 would place the one
model, animate the scene from the camera eye, draw passes 0 and 1, and
restore.
The camera is a CCamera made and installed the way the PlayerModel
pane makes its fallback camera (CameraCreate 0x007AC930,
SimpleModelInstallCamera 0x0076CE80). Eye and target come from the
position and forward axis. The yaw and roll properties are solved so
that the view's up vector equals the requested one. The default light is
set the way PlayerModel's constructor sets its own.
An actor is a script object holding one model in the frame's scene. It
is lit through the frame's light callback, placed with
CM2Model::SetBaseTransformTRS (0x00710650), and polled for load and
dressing from the frame's update, never from the paint. A display with
an Extra record is dressed through the engine compositor. The bounding
boxes come from GetSequenceInfo (0x00711A20) and GetBoundingBox
(0x00713640).
C_ModelInfo's getters read the rows of scenes 4, 44 and 596, embedded
from the retail 12.1.7 exports. The four active-scene functions do
nothing, as retail's own documentation says, and live in Compat.lua.
The same calls on Turtle and on retail draw the same picture (scene
4's camera on the Brown Horse, centred on Z, scaled by retail's
normalization).
Frame::Subclass now holds the vtable copy and the per-class method
hash, which Cooldown uses too. Model::DisplayInfo::CreateDisplayModel
builds a display's model for both portraits and actors.
3.3.5's and 4.4.2's SpellShapeshiftForm.dbc give Spirit of Redemption
(form 32) flags 0x4100, which include SHAPESHIFT_FORM_FLAG_NO_AUTO_UNSHIFT
(0x100). So the later clients' CGUnit_C::CanAutoUnshift refuses it, and no
cast, interaction or item use cancels it. 1.12's row has flags 0, so with
autoUnshift on, our CanAutoUnshift allowed it. A priest in Spirit of
Redemption who cast a NOT_SHAPESHIFT spell, right-clicked an NPC or object,
used an item or opened the flight map sent CMSG_CANCEL_AURA for it.
The later-client flags that 1.12's rows lack now sit in one table:
CAN_INTERACT on the druid forms and Ghost Wolf (read only while
autoUnshift is on, as before), and NO_AUTO_UNSHIFT on form 32, which
CanAutoUnshift reads unconditionally, as 4.3.4 does. With it, every
autoUnshift site leaves Spirit of Redemption on and keeps 1.12's own
refusal.
The comment on FormCanInteract also records why a locked object still
unshifts. It opens by a spell (Opening 6478 for chests and barrels), and
the server's CheckCast form test refuses that spell on 1.12's spell data,
which keeps SPELL_ATTR_NOT_SHAPESHIFT (3.3.5 dropped it).
1.12's SpellShapeshiftForm.dbc gives SHAPESHIFT_FORM_FLAG_CAN_INTERACT
(0x8) only to Shadowform. 3.3.5 and 4.4.2 also give it to Cat, Travel,
Aquatic, Bear, Dire Bear and Ghost Wolf, and Turtle's id 11 (Swift
Travel Form) has it there too. So in the later clients, these forms pass
the NPC right-click gate (CGPlayer_C::HandleOnRightClick, 0x005F0130)
and the game-object use check (0x005F3130) as they are. The form cancel
that comes before the range check almost never runs.
In 1.12, autoUnshift cancelled every druid form at that gate, even when
the NPC was out of interact range. With autoUnshift on, the redirected
IsShapeShifted calls at both gates and at CanInteractNow (0x00606880)
now read a form in that set as able to interact. They report "not
shifted", so the engine's own 0x8 test that follows does not refuse it,
and the cursor shows the NPC's service icon. The cancel stays for a form
that cannot interact in either client.
Neither vmangos nor tortoise-wow tests the form on an NPC or object
interaction. CanInteractWithNPC and the use handlers have no form check;
the only one is item use. So the client gates are the only refusal.
* fix(loot): skip corpses that stay lootable after LootAllCorpses
A corpse whose remaining loot this player can never take keeps
UNIT_DYNFLAG_LOOTABLE set: quest items for quests they don't have,
condition-gated loot, and the like. The per-corpse re-check still
passes, so a caller that runs C_Loot.LootAllCorpses from a timer
re-opens the same corpse on every walk and re-sends the refused
CMSG_LOOT_ITEM, which never clears.
Loot mode now remembers every corpse it opened and released. Later
walks skip a remembered corpse while it is still visible and
lootable; the entry is dropped once the corpse stops being lootable or
leaves the object manager. A corpse that merely left render range is
dropped too, so it gets one retry when the player comes back.
ScanNearbyLoot stays read-only and keeps reporting the corpse.
1.12 has no per-slot "cannot loot" flag (GetLootSlotInfo has no
`locked` return), so one refused request per corpse is unavoidable;
this only stops it from repeating on every walk.
* docs(loot): describe the LootAllCorpses corpse skip
Explain why a corpse that stays lootable after the walk is skipped by
later walks, and when the skip entry is dropped.
* fix(loot): skip only corpses that open empty in LootAllCorpses
The previous change remembered every corpse the loot walk opened. The
most common reason a corpse stays UNIT_DYNFLAG_LOOTABLE is full bags,
so those corpses were never looted again by the walk, even after the
player freed bag space. Rolls and master-loot assignments in progress
had the same problem.
The server never sends a player a loot slot that player cannot take:
another member's quest item and condition-gated loot are left out of
SMSG_LOOT_RESPONSE, while the corpse stays lootable for as long as any
loot remains. So the stuck corpse opens to an EMPTY window, with no
coin and no populated VAR_LOOT_SLOTS entry. Loot mode now remembers a
corpse only when the scraped window is empty. A window with anything
in it (full bags, a roll, a master-loot slot) is retried.
An entry is forgotten:
- on the first world tick where its unit is gone or no longer
lootable. This replaces the prune at walk start, which missed a
corpse that left view and came back, and a creature that respawned
with the same GUID and died again, between two walks;
- all at once on QUEST_LOG_UPDATE (event 0x134, observed through the
shared FUN_FIRE_EVENT_NO_ARGS interceptor and never swallowed),
because quest items are per-player loot and a quest change can put
an item into a window that was empty.
The memory moves out of the per-walk ScanCtx into its own vector. The
API reference now describes the skip as a contract only.
---------
Co-authored-by: Brues <5278969+brues-code@users.noreply.github.com>